Sewing with leather pt.2

Posted by Kathleen Fasanella on May 21, 2009 at 2:35 pm / Patterns, Sewing, Tutorial / Trackback

Today’s entry will illustrate an example of how to lay out a pattern using what you learned in yesterday’s entry. I hope the take away for everyone is how invaluable sketches can be as frequently used visual tools. Here is a sketch of the pattern we’ll be working with, style #22304. The sketch shown here is not technically correct, I did this for resale for the home sewing market eons ago so it was shown with and without the hairpipe option. In real life, you’d show it with or without the hairpipe but not both. Although identical (except for hairpipe), they’d have different style numbers.

For simplicity, I’ve followed Barb’s advice (thank you!) and labeled the pattern pieces on the sketch. In real life, we wouldn’t do that, not usually although it could be a good idea for leather construction. In real life, pieces aren’t labeled A, B, C etc. They have PN numbers instead. Again, the letters are for the purposes of this tutorial only, and should not be confused as a standard practice to adopt. In summary, the first step in laying out a pattern is making sure you have all the pieces you need. You don’t want to know how often this mistake is made. At this point we’ll compare the sketch to the cutter’s must:


Shell/Self
A-Right center front
B-Left center front
C-Right lower front
D-Left lower front
E-Upper side front (2)
F-Lower side front (2)
G-Center back (2)
H-Lower (center) back (2)
I-Upper side back (2)
J-Lower side back (2)
K-Under collar (2)
L-Top collar
Not shown:
M-Upper front facing (2)
N-Lower front facing (2)
Linings, fusibles etc

By now you should have noticed that some of the pieces you might think are two per (center fronts, lower center fronts) are not. If these were two per, the “V” at the overlap wouldn’t match. An explanation of that little problem is here.

As much as you want to get to the fun part, it is critical you’re certain the pattern pieces are labeled correctly before you start laying out pieces. Each piece must have an information block among other things (pt.2). For our purposes at this point, we’re concerned about nap. Your nap arrows must be correct. Surely I’ve written an entry on the meaning of grainline arrows but I can’t find one. Below is a sample of nap arrow.

The reason for this is based on nap of the hide I explained yesterday, your pieces can only be laid nap down. If you lay one front nap up and the other nap down, it’ll be very obvious once the item has been constructed because the sides won’t match; they’ll be what we call “shaded”. You may well be the rare exception who will be able to keep track of nap but usually when you get into the jig saw phase of laying out pieces, you’ll only be looking at area and shapes, not text instructions written on pattern pieces. It’s a spatial thing, not verbal. Plus, so many pieces look similar top to bottom or even side to side, it gets a bit confusing. Here’s a sample of one piece from this pattern, can you look at the technical sketch and know the direction these should be laid in?

The piece in sketch 1 is the same piece in sketch 2. The right and left sides of the piece are similar in angle and length. Without a nap arrow, it’s truly difficult to know how to lay it on the hide. With a nap arrow, less reading is required.

Well, I’d planned to finish more than this today, intending to actually show how to lay out the pieces on the hide (my least favorite thing to do) but I think it’d be a bit much so I’ll leave that for part three. With all the artwork, it took me longer than I expected to write this one and artwork is my weakness for sure. For the next entry I have to re-size all those pattern pieces from my CAD program and flip and mirror them every which way to lay them on the ugly hide I drew yesterday. Ick.

Related entries:
Poka Yoke pattern making (leather pattern design tips)
Piece naming conventions (tips to prevent confusion)
PN Numbers
Checking a pattern pt.1
Checking a pattern pt.2

8 Responses to “Sewing with leather pt.2”

Comments RSS feed

Valerie Burner
May 21st, 2009
5:22 PM

This leather tutorial is very interesting. There is more to leather construction than I thought. I am looking forward to the rest of the series! Your artwork looks fine to me!

Natasha
May 26th, 2009
1:39 PM

I’m looking forward to seeing the next part. I’ve got some half chaps I need to take in.

Christina
September 17th, 2010
5:44 AM

Have you posted part 3 of sewing with leather?

Kathleen
September 17th, 2010
6:17 AM

There didn’t seem to be any interest, here or off blog.

Adele
April 2nd, 2011
5:54 PM

I just starting sewing western riding (horse) clothes for my daughter and we’re using lambskin for her top. I found your articles to be very informative. I’m having problems with topstitching a leather collar. It bunches up. I’m using a rolling foot on a regulart machine. The collar is leather upper with material for the underside of the collar. Was told to start stitching in the CB of the collar and stitch to the side from there. Hope it works.

Chris
May 31st, 2011
5:32 AM

hi Kathleen, I’ve never worked with leather, but am hoping to get some experience soon, so was delighted to find this series when going through the archives. Did you add to it after this? or if not, are there any other online sources of info that you would recommend?

Kathleen
June 8th, 2011
4:25 PM

Hi Chris. As I mentioned above, there didn’t seem to be sufficient interest to warrant writing more about it. Maybe someday. I didn’t give up so quickly, I also wrote somewhat related entries on leather shopping bags later on. If you’re a forum member, maybe you can post questions there which I can answer so as not to clutter the front page.

Review: Leather Fashion Design
November 30th, 2011
4:35 PM

[…] Leather pattern making and sewing class Sewing with leather pt.1 Sewing with leather pt.2 addthis_pub = […]

Leave a Reply

Current ye@r *

Archives

Categories

The Entrepreneur's Guide to Sewn Product Manufacturing

Often described as the garment industry “blue book”, the most highly rated book in the business is guaranteed to get you off to a solid start or your money back. Many service providers require you read this before they’ll work with you. Learn more »

Subscription Options

RSS Feed Google Reader My Yahoo My MSN Technorati

Subscribe by email: